Now From৳ 36000 ৳ 39600
- Value ৳ 36000
- You Save ৳ 3600
1. Home delivery inside Dhaka 80 BDT and outside Dhaka 150 BDT
2. The customer will pay the bill if products Weight more than 1 Kg.
The Fine Print
- ER OUTPUT L/R (treble): 12W+12W RMSL/R (mid-range and bass): 50W + 50W
- RMS SIGNAL TO NOISE RATIO: 94dB(A)
- NOISE LEVEL: 25dB(A)
- INPUT SENSITIVITY?Balanced input: 700±50mV
- Auxiliary input: 600±50mV
- Bluetooth input: 350±50mFFs
- Optical input: 350±50mFFs
- Coaxial input: 350±50 mFFs
- FREQUENCY RESPONSE: 48Hz~20KHz
- TWEETER UNIT: Planar diaphragm tweeters
- MID-RANGE & BASS DRIVER?5.5 inch (148mm)
- DIMENSON: 8in x 13.5in x 10.5in (WxHxD)
- CONNECTION CABLE: 5M/16.4FT
- COLOUR: Wooden.
- Warranty: 1 Year
The Step Beyond Sound
Full wooden side panel finish achieves an elegant and luxurious look.
Four EQ Modes: Vocal, Monitor, Classic, and Dynamic.
Included wireless remote for audio input, volume adjustment and mode switching.
Inputs supported: coaxial, optical, RCA, AUX, and Bluetooth.
HiFi Classic Concepts Cutting Edge Technology
For the first time, Edifier has brought cutting edge sound technology to a classic style. Edifier’s S2000Pro bookshelf speakers pays tribute to the speakers from the past with the elegant side wood panelling. These speakers elevate the classic style of bookshelf speakers to the next level of sound with modern sensibilities and advancements. The S2000Pro bookshelf speakers are the perfect blend of classic design and high performance. Edifier paid much attention to detail with the time-consuming process of wood processing seen on these hi-tech bookshelf speakers. The S2000pro gives you the feeling of luxury and edgy all at the same time.
Professionalism, Elegance, Luxury
Matte black paint with luxurious wood baffle plate, metallic surface grill, and gold pads underneath. S2000Pro exudes elegance and demands to be the centre of attention with both its style and sound. Genuine birch sideboards add quality accents that compliment any décor. The S2000pro appeals to old and young with its perfectly blended style and professional quality.
Thick Wood Side Panels
The S2000PRO has an elegant wood veneer that encaptures the beauty of the cabinent. Angled design allows for pinpoint accuracy for audio setups. Raised feet allows for audio to emit directly from the speaker and limited vibrations through the surface.
Rich Low-Distorted Treble
The S2000Pro comes equipped with a rich low-distorted flat diaphragm tweeter. The flat diaphragm provides a fast response rate that gives inherent advantages such as excellent high frequencies that lower tiered bookshelf speakers do not provide. Enjoy the advantages of a flat diaphragm that provides a fast response rate. Moreover, enjoy the advantage of excellent high frequencies.
Aluminium Cone Woofer
The high-strength low-distortion from the aluminium cone makes sounds unique and clear. The S2000Pro bookshelf speakers take advantage of the DSP digital electronic crossover thanks to the help of German engineering from the KLIPPEL precise analysis system. This system is used so that the metal aspects of these speakers do not emit the sound of metal meanwhile taking advantages of the metal aspects. The energy absorbing rubber hemming results in giving the 5.5-inch aluminium cone woofer a precise, clean, and low-frequency performance. Audiophile components help to represent top of the line powered bookshelf speakers any reviewer would love.
DSP-Based Electronic Crossover and Dynamic Management
The S2000Pro uses an application of new electro-acoustic technology. Taking advantage of two Texas Instruments digital processing DSP chips, TLV320AIC3254, the S2000Pro uses its miniDSP function to reach the culmination of incredibly loud and heavy bass. Independent of the electronic crossover and dynamic management, the S2000Pro offers precise control of frequency allocation for the bookshelf loudspeaker performance.
Digital-to-Analogue and Analogue-to-Digital Converter Signal
The onboard DAC (digital-to-analogue conversion) and ADC (analogue-to-digital conversion) of the S2000Pro has a built-in officially branded Burr-Brown PCM1802 Texas Instrument. The Burr-Brown DAC and ADC uses audio signalling that reaches towards 105dB signal to noise ratio (SNR). The analogue input signal uses traditional HiFi methods that are recognised by WIMA capacitors. This in turn ensures a lower signal loss. As for optical and coaxial inputs, the interface chip, PCM9211 also from Burr-Brown, supports a 24-bit 216-kHz high precision input digital audio signal.
Adjustable Treble, Bass, and Volume Controls
Located on the rear panel of the S2000Pro speakers are three knobs for adjusting treble, bass and, volume; a fully featured set of controls and inputs. The master volume knob has precision adjustment and memory volume control set above a certain volume level. RCA inputs are available for both RCA and RCA to AUX connections. Experience high definition audio through either the optical or coaxial connection. XLR inputs allow you to connect the S2000Pro to a mixer for those more advanced in audio technology. Comes with 16-foot/5-metre connecting cable. The studio monitor knobs are easy to access and clearly legible.
Four On-Board EQ Settings
Change the sound of your speakers at the press of a button. The S2000Pro has four on-board EQ settings: vocal, monitor, classic, and dynamic. Swap between 4 different EQ settings at will, perfect for getting the most out of your speakers. Vocal for performances, monitor for electronic music, classic for classical music and dynamic for watching movies or playing games. The diversity of sound these studio monitors deliver makes your listening experience all the more fun and enjoyable. The S2000Pro makes it easy for audiophiles to show off their hi-tech professional sounding bookshelf speakers.
Full Digital Amplifier Powered Speaker
S2000Pro uses three professional digital amplifier chips for producing the best sound in its class. The TAS5754 from Texas Instruments run independently from each other ensuring they do not cause interference while running their respective purpose. The first chip is in control of treble and bass, respectively driving both speakers. The second chip runs strictly the woofers of the S2000Pro using a PBTL (parallel to the bridge) connection which helps build power reserves. The last TAS5754 is dedicated to the amplifier output frequency of 768KHz. With the dedicated chip these speakers are fully optimised to reduce high frequency distortion and local noise.
Supports Up To 192KHz Sampling Rate
Edifier strives for audio excellence in all products. All our products need to meet a standard of quality with low distortion audio playback and must achieve a high sample rate. The S2000Pro from Edifier is the epitome of all of Edifier’s HiFi audio equipment. The S2000Pro digital audio interfaces with a digital audio signal of 24-BIT 192KHz to meet the needs of enthusiasts demanding signal reproduction. The S2000Pro does not simply pursue a high rate signal level. The S2000Pro is designed from the start with low-distortion tweeters and woofers to make a truly system-level "low distortion."
The S2000Pro comes packaged with a professional wireless remote control for easy volume control, input select, EQ mode selection along with other operations. Never get up from your couch for audio adjustments again. The elegant S2000Pro bookshelf speaker wireless remote control gives you power at your fingertips and are well suited for the studio monitor bookshelf speakers. The control makes it easy to manage volume, change inputs, choose which EQ mode you prefer, and control other operations.